This video provides instructions covering the installation of Oracle Linux using physical hardware.

This video provides instructions covering how to install Oracle Linux in Oracle Cloud Infrastructure using a Bare Metal Shape.

This video is the first in a series of videos, each of which describe different aspects of the Oracle Linux boot process.
This video describes the high-level steps of the boot process in Basic Input/Output System, or BIOS mode.

This video describes GRUB2 in Oracle Linux. This video is one in a series of videos, each of which describe different aspects of the Oracle Linux 8 boot process.

This video describes the Unified Extensible Firmware Interface, or UEFI, which is a newer method for booting Oracle Linux systems.

This video is one in a series of videos, each of which describe different aspects of the Oracle Linux 8 boot process.

This video is one of a series of videos, each of which describes different aspects of the Oracle Linux boot process.
This video describes the configuration and use of systemd target units in Oracle Linux 8.

Duration: 30 minutes

Duration: 45 minutes

Duration: 35 minutes

Duration: 1 hour

Duration: 1 hour, 30 minutes

This video demonstrates how to manage date and time commands on Oracle Linux 8.

This video demonstrates how to manage the Proc File System on Oracle Linux 8.

This video demonstrates how to manage the sysfs file system on Oracle Linux 8.

This video demonstrates how to manage cron utility on Oracle Linux.

This video demonstrates how to manage the anacron, at, and batch utilities on Oracle Linux.

This video demonstrates how to configure kernel modules on Oracle Linux.

This video demonstrates how to manage users and group administration on Oracle Linux.

This video demonstrates how to manage password managing and su command on Oracle Linux.

This video provides a demonstration of how to configure vsftpd on Oracle Linux and connect to the ftp server from a client system.

For additional videos on Oracle Linux, check out oracle.com/goto/oraclelinuxlearning.

For Oracle Linux 8 documentation, see docs.oracle.com/en/operating-systems/oracle-linux/8.

This video provides an introduction to vim, describing Normal vs. Insert mode, how to open, save and close a file, move around a file, search, and modify a file.

This video demonstrates using Leapp to upgrade a current release Oracle Linux 7 system to current release Oracle Linux 8. It provides a list of preupgrade checks and shows how to perform the preupgrade and upgrade of an Oracle Linux 7 cloud instance.

For additional videos on Oracle Linux check out https://www.oracle.com/goto/oraclelinuxlearning.

Learn more at:

Oracle Linux Learning Library - https://www.oracle.com/goto/linuxlearninglibrary
Oracle Linux 8 Learning Path - https://www.oracle.com/goto/oraclelinuxlearningpath
Free Oracle Linux Learning Labs - https://luna.oracle.com/team/418f9969-5e1c-4bbb-ae5f-b8b6acffc9f1

This video provides information and examples for using Control Groups (cgroups) to manage CPU time.

This video provides an introduction and beginner examples on using SELinux.

This video provides information and examples for using PAM.

This video provides an introduction to Udev

For additional videos on Oracle Linux check out https://www.oracle.com/goto/oraclelinuxlearning.

Oracle Linux Tutorials and Labs:

https://docs.oracle.com/learn/?q=Oracle%20Linux&sort=&lang=en

Many of these tutorials provide a free lab environment using the <b>Try It</b> button on the tutorial tile, or by directly going to http://www.oracle.com/goto/linuxluna.

Learn more at:

Oracle Linux Learning Library - https://www.oracle.com/goto/linuxlearninglibrary
Oracle Linux 8 Learning Path - https://www.oracle.com/goto/oraclelinuxlearningpath
Oracle Linux 8 Documentation - https://docs.oracle.com/en/operating-systems/oracle-linux/8/

Duration: 45 minutes

Duration: 35 minutes

Duration: 40 minutes

Duration: 45 minutes

Duration: 45 minutes

Duration: 1 hour

Duration: 45 minutes

Duration: 90 minutes

Duration: 60 minutes

Duration: 45 minutes

This video demonstrates the sosreport utility to collect system information on Oracle Linux.

This video demonstrates the iostat utility to review input output statistics for devices on Oracle Linux.

This video demonstrates the mpstat utility reports processor statistics on Oracle Linux. For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates reporting virtual memory statistics using the vmstat utility on Oracle Linux. For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates reporting and displaying system processes in real time using the top utility on Oracle Linux. For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates using the netstat utility on Oracle Linux. For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates using the rsyslog logging utility on Oracle Linux. The rsyslog utility contains contains global

directives, modules, and rules for logging events within a system.

For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates using the logwatch logging utility on Oracle Linux. The logwatch utility

is a utility to perform basic log file monitoring and analysis.

For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video demonstrates using journald logging utility with journalctl on Oracle Linux.

Journald is a logging service included with systemd. It collects and stores

logging data in structured, indexed journals.

Journalctl is a command utility used to view journal logs.

For additional videos on Oracle Linux check out oracle.com/goto/oraclelinuxlearning.

This video describes the purpose of the Linux Auditing System and a demonstration of the command-line interface to create audit rules and search for and report on violation of these rules.

Duration: 1 hour

Duration: 90 minutes

Duration: 45 minutes

This video provides information related to the different network configuration files used when setting up a network on Oracle Linux.

This video provides information related to using the NetworkManager nmcli utility to add a secondary NIC
to an Oracle Cloud Instance.

Learn how to configure increased network throughput and high availability on an Oracle Linux system using network bonding with multiple interfaces on Oracle Linux 8.Use the nmcli command line utility to create and delete a network bond interfaces.

For additional videos on Oracle Linux check out this playlist https://youtube.com/playlist?list=PLKCk3OyNwIztOLwiTOF0HOV5aiTjGNpLl

For free hands on Oracle Linux practice labs go to https://www.oracle.com/goto/linuxluna

This video demonstrates configuring VLANs from command line on an Oracle Linux system. It shows creating and deleting VLANs with the nmcli and ip command line utilities.

For additional videos on Oracle Linux check out https://www.oracle.com/goto/oraclelinuxlearning

For free hands on Oracle Linux practice labs go to https://www.oracle.com/goto/linuxluna

Learn more at:

Oracle Linux Learning Library - https://www.oracle.com/goto/linuxlearninglibrary
Oracle Linux 8 Learning Path - https://www.oracle.com/goto/oraclelinuxlearningpath
Oracle Linux 8 Documentation - https://docs.oracle.com/en/operating-systems/oracle-linux/8/

This video provides information related to using the Linux ip utility to get and set network details on Oracle Linux in Oracle Cloud Instance.

This video provides an introduction to using the firewalld utility.

This video provides an introduction to using the nftables firewall.

Duration: 1 hour, 30 minutes

Duration: 45 minutes

Duration: 45 minutes

This video provides background and practical examples of administrating Oracle Linux packages using DNF.

This video provides instructions to install the Oracle Unbreakable Enterprise Kernel Release 6 (UEK R6).

his video provides instructions for installing the EPEL repository.

Duration: 45 minutes

Duration: 45 minutes

This video provides a background and introduction to Oracle Ksplice.  After the introduction, the video demonstrates how to register an Oracle Linux system with the Unbreakable Linux Network (ULN) for online Ksplice updates.  Once the system is registered, you are guided through the install of the Oracle Ksplice packages.

This video provides examples of running Ksplice commands (Enhanced Client) to execute various Ksplice tasks.

This video shows how to utilize the uptrack commands to handle online kernel patching tasks on Oracle Linux.

This video shows how to remove the Oracle Ksplice packages and unregister from the Unbreakable Linux Network.

Duration: 45 minutes

This video provides instructions on how to make secure connections to servers through a bastion jump host via the ProxyJump OpenSSH feature.

This video provides information and examples on using SSH and the ssh_config. It discusses a brief history of SSH and walks through an example of using the ssh command and the client-side ssh_config.

This video provides information and examples on using the three different types of SSH tunnels: Local, Reverse, and Dynamic.

This video provides instructions for using Ansible with Vagrant to provision an Oracle Linux system with an additional user and ssh key.

This video discusses the steps needed to get a graphical desktop installed on a Minimal Installation of Oracle Linux.  We install and configure the VNC Server service and show how to create an ssh tunnel for securely connecting to the VNC Server for remote administration.

This video provides instructions to enable the Gnome 3 Screen Sharing feature and how to connect to a session securely over an SSH tunnel.

Duration: 45 minutes

This video provides information and examples for disk partitioning. The examples focus on fdisk, which comes standard with Oracle Linux for handling the different partition types.

This video provides information on the extended file system.  Examples include creating an ext2, ext3, and ext4 file system and how to convert from ext2 to ext3 and ext3 to ext4.

This video provides information and examples for attaching or detaching a disk or block device using the mount or umount command.

This video provides information on using the fstab file, including how to configure it and mount a block volume on an Oracle Cloud Infrastructure instance.

This video provides information on using swap space. Examples include creating, preparing, and enabling a swap file and some tools to monitor its use.

This video provides a demonstration of how to configure an NFS server on Oracle Linux.

This video provides a demonstration of how to mount an NFS export on Oracle Linux.

This video provides information and examples for automounting NFS shares using the autofs.

This video provides information and examples for creating, mounting, and growing an XFS file system.

This video provides information and examples for creating, mounting, growing, and repairing a Btrfs file system.

This video provides information and examples for creating and using subvolumes and snapshots on a Btrfs file system.

This video provides information and examples for using the Snapper utility to automate, create, compare, and delete Btrfs snapshots.

This video provides an introduction to the Gluster file system and a demonstration of Gluster Storage on Oracle Linux.

This video provides information and examples for using Logical Volume Management to inspect and grow an LVM Group.

Duration: 1 hour, 30 minutes

Duration: 30 minutes

Duration: 30 minutes

Duration: 45 minutes

Duration: 40 minutes

Duration: 60 minutes

Duration: 45 minutes

Duration: 2 hours

Duration: 45 minutes

Duration: 30 minutes

Duration: 30 minutes

This video provides a background on KVM, how to verify the KVM modules are loaded, install the virtualization packages, and validate the environment is ready for hosting guest VMs.

This video demonstrates how to install, set up, and connect to the Cockpit web console to allow managing of KVM VMs.

This video demonstrates how to create an Oracle Linux virtual machine using the Cockpit web console on a KVM host.

This video shows how to successfully ssh into a KVM VM configured with a NAT-based network adapter.

This video demonstrates two of the ways to create a network bridge on Oracle Linux for use with KVM.

This video demonstrates creating a couple KVM virtual machines leveraging a network bridge.  The demo uses both command-line and the Cockpit web console to accomplish this task.

This video demonstrates editing an existing NAT-based KVM virtual machine and switching the network interface to use a network bridge.  This demo uses both the command-line and Cockpit web console to accomplish this task.

This video demonstrates the use of virt-v2v to convert a VirtualBox ova export file to a qcow2 disk image and automatically import into KVM.

This video demonstrates how to create a new virtual disk and attach it to an existing KVM virtual machine.

Duration 45mins

This video will demonstrate how to install VirtualBox 6.1 on a physical Oracle Linux system.

This video demonstrates how to install the VirtualBox 6.1 Extension Pack using both the graphical interface and the command-line.

This video demonstrates how to install the latest Oracle Linux into a VirtualBox VM using both the graphical interface and the command-line.

This video demonstrates how to install the VirtualBox 6.1 Guest Additions on Oracle Linux.

This video demonstrates how to export an Oracle Linux 8 guest VM into the OVA format using both the graphical interface and the command-line.

This Podman video discusses high-level concepts outlining how to view what a container is.

This Podman video takes a high-level approach to describing why a Container is not the same as a Virtual Machine.

For additional videos on Oracle Linux:  https://www.oracle.com/goto/oraclelinuxlearning
For Oracle Linux documentation:  https://docs.oracle.com/en/operating-systems/oracle-linux/
For more Oracle Cloud Native Environment videos go to: https://www.oracle.com/goto/cloudnativelearning

This video demonstrates how to install Podman, Buildah, and Skopeo on Oracle Linux 8 for building, running, and maintaining Linux containers.

This Podman video outlines the difference between a Public, and Private, Container Registry.  It summarises the difference between a 'container registry' and a 'container repository', shows how Podman uses the 'registries.conf' file to determine which registries to search, then provides a demonstration of 'pulling', and using,  an Oracle Linux 8 Slim container.
For additional videos on Oracle Linux:  https://www.oracle.com/goto/oraclelinuxlearning

For Oracle Linux documentation: https://docs.oracle.com/en/operating-systems/oracle-linux/ 

For more Oracle Cloud Native Environment videos go to: https://www.oracle.com/goto/cloudnativelearning

This video demonstrates to the user how to use Podman itself to configure a (simple) local container registry to provide a non-https internally-hosted resource for internal teams, such as DevOps, to use.  

For additional videos on Oracle Linux:
https://www.oracle.com/goto/oraclelinuxlearning

For Oracle Linux documentation:
https://docs.oracle.com/en/operating-systems/oracle-linux/  

For more Oracle Cloud Native Environment videos go to: https://www.oracle.com/goto/cloudnativelearning

This video demonstrates how to run containers using Podman on Oracle Linux.

This video provides an introduction into how using a Dockerfile makes layers and are then saved as images.  Then how how images are used to create containers, rather than 'becoming' containers themselves.  It also shows how using the 'podman history' command can be used to reveal the component layers within an image.

For additional videos on Oracle Linux:
https://www.oracle.com/goto/oraclelinuxlearning

For Oracle Linux documentation:
https://docs.oracle.com/en/operating-systems/oracle-linux/  

This video demonstrates how to use the bind mount storage type within containers using Podman on Oracle Linux.

This video demonstrates how to use volumes as storage within containers using Podman on Oracle Linux.

This video demonstrates how to use a Dockerfile to buile a container based on oraclelinux:8 using Podman on Oracle Linux

This video demonstrates how to use a chroot jail on Oracle Linux to install and run Nginx.

This video provides a high-level overview/introduction to what Kubernetes is and introduces a few basic concepts to you.

For additional videos on Oracle Linux: https://www.oracle.com/goto/oraclelinuxlearning

For Oracle Linux documentation: https://docs.oracle.com/en/operating-systems/oracle-linux/

Unsure what the various Kubernetes terms you hear being used mean?  Then take a couple of minutes out, and this will introduce the basic resource terms and provide context for their use.

For additional videos on Oracle Linux:
https://www.oracle.com/goto/oraclelinuxlearning

For Oracle Linux documentation:
https://docs.oracle.com/en/operating-systems/oracle-linux/ 

This video provides the steps required in order to install Minikube and configure it to use Podman on Oracle Linux

For additional videos on Oracle Linux check out  https://www.oracle.com/goto/oraclelinuxlearning.

Oracle Linux Tutorials and Labs:  https://docs.oracle.com/learn/?q=Oracle%20Linux&sort=&lang=en

Many of these tutorials provide a free lab environment using the <b>Try It</b> button on the tutorial tile, or by directly going to http://www.oracle.com/goto/linuxluna.

Learn more at:

Oracle Linux Learning Library - https://www.oracle.com/goto/linuxlearninglibrary
Oracle Linux 8 Learning Path - https://www.oracle.com/goto/oraclelinuxlearningpath
Oracle Linux 8 Documentation - https://docs.oracle.com/en/operating-systems/oracle-linux/8/
 

Duration: 30mins

Duration: 30mins

Duration: 45mins

Duration: 45mins